SW-M650-- SWITEK High Precision Servo Injection Molding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	3534
Shot weight	g	3216
Shot speed	mm/s	609
Screw diameter	mm	100
Injection pressure	MPa	143
Screw L:D ratio	--	21
CLAMPING UNIT
Clamping force	kN	6500
Opening Stroke	mm	920
Space between tie bars	mm x mm	925 x 875
Mold thickness(min)	mm	380
Mold thickness(max)	mm	950
Hydraulic ejection stroke	mm	280
Hydraulic ejection force	kN	180
POWER UNIT
Pump motor	kW	73
Heating capacity	kW	42
GENERAL
Oil tank capacity	L	0

Platen Dimensions

Machine Dimmension

SA-330P is a servo hydraulic energy-saving injection molding machine by FCS Machinery which is suitable for the production of bucket container. This series of injection molding machine have a clamping force range from 220Tons ~ 1000Tons. In the video FCS is trying the production of disposable tablewares.

For the production of disposable tableware, there're a couple of solutions. The basic automatio solution would be to pick the table wares out with a high speed 3 axis injection robot SW7112DS; You can also choose to have it Single PCS Packed or have it Bag Packed or Box packed. With more than 17 years cooperating with the mold maker and injection molding machine manufacturers, SWITEK is experienced to provide you with a turn-key disposable tableware injection production solutions.

Turn-key IML Solutions