Arge Robotik 3 Axis Top Entry IML Robot Installed for the Production of 12L Rectangular IML Buckets.

Arge Robotik 3 Axis Top Entry IML Robot Installed for the Production of 12L Rectangular IML Buckets.

Tags: Arge Robotik, Top Entry IML System, IML Robot, SWITEK Robot, IML Solution for Rectangular Buckets.

Arge Robotik 3 axis top entry IML robot installed for the production of 12L rectangular IML Buckets.

The IML robot installed is a solution for the production of 12L rectangular IML buckets. Unlike the round bucket, the rectangular buckets has four angels and is not easy to have it well labeled, to solve this problem, 3 brushes were added for a better wrapping of the lables. With different type of label material, different static scheme would be applied.

As the competitor of Arge robotik, SWITEK Automation had been providing the turn-key IML Solutions since 2009. For an IML solution for injection molding machine around 450T, the IML robot can be SWITEK SW7312DS, which has a payload up to 8kg, is a perfect robot for small and medium size containers top entry IML System.

SW7312DS

Unit: mm

X1	X2	X3	X4	Y	YM1	YM2	Z	L	W	H	Payload
1020	730	0	0	1200	450	750	1700	2600	1660	2110	5kg

Q & A About Robotic Arms and Injection Automation

What Would be a SWITEK Turn-key 8 Cavities silicone Cartridge Tubes Side Entry IML Solutions Include?

With the advancement of the IML technology, more and more silicone cartridge producers choose to have an IML silicone cartridge tubes as the subsitution of the traditional off print silicone cartridge tubes. With an IML solutions, the silicone cartridge tubes producer will be able to produce an IML silicone cartridge tubes immediately after the injection process.

8 Cavities silicone Cartridge Tubes Side Entry IML Solution

Generally for one set of silicone cartridge tubes there are 3 parts, the body of the silicone tube,the caps for the repeat use of the silicone sealant and the bottom block which you can push the sealant out. So for a standard turn-key IML solutions of an 8 cavities silicone cartridge tubes SWITEK will provide:

Side entry IML Robot with 8 cavities magazine + EOAT Sets for IML production of silicone cartridge tubes.
8 Cavities hot runner mold for silliocne cartridge tubes body. The injection molding machine to recommend for this part would be YIZUMI UN350A5-EU high end servo injection molding machine, HAIDA HD330L servo injection molding machine and HaiTian MA3800 servo injection molding machine.
16 Cavities hot runner mold for bottom block. The injection molding machine to recommend for this part would be Haitian MA1600 servo injection molding machine, Haida HD170L servo injection molding machine and YIZUMI UN160A5-EU high end servo injection molding machine.
32 Cavities hot runner mold for caps. The injection molding machine to recommend for this part would be Haitian MA1600 servo injection molding machine, Haida HD170L servo injection molding machine and YIZUMI UN160A5-EU high end servo injection molding machine.

For the injection molding machine the silicone cartridge producer can choose to buy from the local distributors or have SWITEK to buy it as part of the turn-key IML solutions.

For more information about a turn-key IML solution for Silicone cartridge tube please feel free to contact Adams from SWITEK Automation for a professional proposal of a ready to work IML system for IML Silicone cartridge production.

Contact SWITEK Robot On WhatsApp.