Systec 420/820 C SP -- Sumitomo High Speed Injection Molding Machine and IML Solutions

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1362
Shot weight	g	124
Shot speed	mm/s	380
Screw diameter	mm	70
Injection pressure	MPa	242
Screw L:D ratio	--	23
CLAMPING UNIT
Clamping force	kN	4200
Opening Stroke	mm	770
Space between tie bars	mm x mm	820 x 820
Mold thickness(min)	mm	380
Mold thickness(max)	mm	825
Hydraulic ejection stroke	mm	230
Hydraulic ejection force	kN	96
POWER UNIT
Pump motor	kW	166
Heating capacity	kW	30.6
GENERAL
Oil tank capacity	L	820

Platen Dimension

Machine Dimmension

#	Value
A	292 mm
B	1519 mm
C	906 mm
D Max	1839 mm
G	2464 mm
M	9544 mm
F Min	1960 mm
S	534 mm
SH	2381 mm

SWITEK Turn-key 8 Cavities Cups Side Entry IML Solutions with Vision Control + Packing Solutions

Starting from $285,714

GECH IML on show turn-key IML solutions of 8 cavities Yogurt cups high speed IML production with vision control at a cycle time of 5.5s with YZY IML label and Brosen Mold by Welltec high speed injection molding machine TTI-353Sec.

The IML system is in production of Yogurt cups with a containing capacity of 100g, which is one of the most popular design of extreme thin-wall container with a thickness of 0.55mm for dairy products. And the total cycle time of 5.5s will promise the productivity of the system. It's no doubt that GECH IML has done a great job in this solutions.

The counter part of the GECH 8 cavities cups side entry IML solution, SWITEK IML Solutions in production provided not noly the vision control but also packing solutions to the IML cups producers. As a system for the production of food package, the prevention of secondary polution tend to be very important to ensure the food safety. So a system free from humam contact from injection to packing is no doubt an ideal solution.

Turn-key IML Solutions