530 SEIII C -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	3810
Shot weight	g	3429
Shot speed	mm/s	148
Screw diameter	mm	105
Injection pressure	MPa	125
Screw L:D ratio	--	18
CLAMPING UNIT
Clamping force	kN	5300
Opening Stroke	mm	850
Space between tie bars	mm x mm	840 x 830
Mold thickness(min)	mm	300
Mold thickness(max)	mm	850
Hydraulic ejection stroke	mm	240
Hydraulic ejection force	kN	166
POWER UNIT
Pump motor	kW	352
Heating capacity	kW	35.73
GENERAL
Oil tank capacity	L	700

Platen Dimension

Machine Dimmension

#	Value
A	2244 mm
B	2005 mm
C	2495 mm
D	7846 mm
E	8995 mm
F	1809 mm
G	1900 mm
H	865 mm
I	800 mm
J	945 mm
K	950 mm

Roboplas onshow 2 cavities 1.2 litter buckets side entry IML Solutions with handle assembly at Fakuma 2017.

The globalized increasing of the labour cost make it more and more difficult to make profit for low value added prarts producing. Automation of the production process would be the best way. It's no doubt that to have the handles assembled immediately after the buckets IML produced will increase the production efficiency dramatically. The Roboplas 2 Cavitites buckets IML solutions with handle assembly for sure is an ideal choice for the buckets producers.

As for similar project of a smaller budget, the IML containers can consider a turn-key system made in China. With a complete supplier chain in China and much lower labour cost compared to their European counter parts, SWITEK IML Solutions will provide a system with the cost of only around 35%~45% of their European counter parts and life long online technical support. With a turn-key solution, the mould and the IML automation system would be well tested in China before delivery to ensure that you'll receive a system of buckets IML production with handle assembly ready to work.

Turn-key IML Solutions