sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
Keywords:Panasonic A6 Servo Installation Instruction, Panasonic A6 Driver, Panasonic A6 Series Servo Motor Manual
To prevent operations by communication (USB/RS232/RS485/Modbus) and operation from the front panel being in conflict with each other, the following exclusive functions will be triggered depending on their respective state:
| Mode | Locked panel conditions |
|---|---|
| The front panel is in "execution display" other than the monitor mode. | Parameter write and EEPROM write by communications will result in command error and not executed. In addition, connection of set-up support software, PANATERM (USB communication) cannot be established. |
| Execution right has been acquired by RS232/RS485/Modbus communications. | No operations other than monitor mode can be made from the front panel. |
| Set-up support software (PANATERM) (USB communication) is connected. |
Please refer to P.7-27 "Communication" for RS232/RS485 communications and to Technical reference (Modbus communication and Block operation Specification) for Modbus communications.
SW255C
Unit: mm
| X1 | X2 | X3 | X4 | Y | YM1 | YM2 | Z | L | W | H | Payload | 300 | 100 | 0 | 0 | 550 | 155 | 395 | -45°~+45° | 650 | 650 | 1260 | 2kg |
|---|
EOAT Assembly Demonstration -- One Cavity Instrument Panel Picking EOAT
Product Descriptions
Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?
As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:
To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.
