sales06@switek.biz
+86 186 5927 5869
Robot Specification
| # | Name | Value |
|---|---|---|
| 1 | Model No.： | SW6715DS |
| 2 | For IMM： | 650~1000 Ton |
| 3 | Payload： | 15 kg |
| 4 | Dry Cycle Time： | 12 s |
| 5 | Height： | 2400 mm |
| # | Name | Value |
|---|---|---|
| 1 | X1 | 1400 mm |
| 2 | X2 | 1180 mm |
| 3 | X3 | 0 mm |
| 4 | X4 | 0 mm |
| 5 | Y | 1500 mm |
| 6 | Z | 2500 mm |
| 7 | YM1 | 480 mm |
| 8 | YM2 | 1020 mm |
| 9 | W | 2200 mm |
| 10 | L | 3120 mm |
| 11 | H | 2400 mm |
| 12 | Hs | 700 mm |
| # | Name | Value |
|---|---|---|
| 1 | For IMM | 650 ~ 1000 Ton |
| 2 | Traverse Stroke （Z） | 2500 mm |
| 3 | Vertical Stroke （Y） | 1500 |
| 4 | Cross Wise Stroke （X） | 1180 |
| 5 | Drive | axis3t |
| 6 | Motor Power （X） | 750 W |
| 7 | Motor Power (Y) | 2000 W |
| 8 | Motor Power (Z) | 1000 W |
| 9 | Vacuum | 2 |
| 10 | Chuck Pipe | 2 |
| 11 | In Mould Time | 3.2 s |
| 12 | MAX Line Speed | X:2 Y:2 Z:2 |
| 13 | Dry Cycle Time | 12 s |
| 14 | Power （KVA） | 6 |
| 15 | Power Input | AC220V/3PH |
| 16 | Working Pressure | 5-7 kgf/cm2 |
| 17 | Air Consumption | 2.8 NL/Cycle |
| 18 | Payload | 15 kg |
| 19 | Net Weight | 1400 kg |
| 20 | Gross Weight | 1440 |
| 21 | Dimension | L 3120 mm |
| W 2200 mm | ||
| H 2400 mm |
Application
You May Also Be Interested
SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.
The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.
The tips for a top entry IML solutions:
- To ensure that the robot has sufficient payload, it's the core of a stable IML system
- To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
- A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.
Injection Machinery News & Express
- SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
- SWITEK New 4 Cavities Burger King Twin-Cups Side Entry IML System Started Up
- SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
- SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
- SWITEK New 4 Cavities Rectangular Box Side Entry IML System Started Up for Production in India
- SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
- India Customer is Testing Their New IML System of 2 Cavities 1L Bucket
- The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
- IML Package -- A Perfect Substitution of Two Compartments IML Cups
- SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
E-mail: sales@switek.biz
Injection Machinery
CopyRight © HuangYanZheng