ZE3000F/1100-- Zhafir All Electric Haitian High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	678
Shot weight	g	0
Shot speed	mm/s	160
Screw diameter	mm	60
Injection pressure	MPa	159
Screw L:D ratio	--	25
CLAMPING UNIT
Clamping force	kN	3000
Opening Stroke	mm	600
Space between tie bars	mm x mm	670 x 670
Mold thickness(min)	mm	250
Mold thickness(max)	mm	650
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	69
POWER UNIT
Pump motor	kW	137
Heating capacity	kW	0
GENERAL
Oil tank capacity	L	135

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	7257 mm
B	1465 mm
C	560 mm
D	245 mm
E	2084 mm
F	4 x M10 L20
G	115 mm
H	143 mm
J	φ60 mm
K	115 mm
L	180 mm
M	φ4 mm
N	SR10

JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.

In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.

To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.

Turn-key IML Solutions