ZE2300F/830 -- Zhafir All Electric Haitian High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	412
Shot weight	g	0
Shot speed	mm/s	160
Screw diameter	mm	50
Injection pressure	MPa	200
Screw L:D ratio	--	25
CLAMPING UNIT
Clamping force	kN	2300
Opening Stroke	mm	550
Space between tie bars	mm x mm	620 x 620
Mold thickness(min)	mm	220
Mold thickness(max)	mm	600
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	55
POWER UNIT
Pump motor	kW	112
Heating capacity	kW	0
GENERAL
Oil tank capacity	L	122

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	6720 mm
B	1330 mm
C	430 mm
D	255 mm
E	2081 mm
F	4 x M10 L20
G	115 mm
H	153 mm
J	φ50 mm
K	115 mm
L	122.5 mm
M	φ4 mm
N	SR10

New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.

This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.

To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.

Turn-key IML Solutions