ZE2300F/830 -- Zhafir All Electric Haitian High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	471
Shot weight	g	0
Shot speed	mm/s	160
Screw diameter	mm	50
Injection pressure	MPa	230
Screw L:D ratio	--	25
CLAMPING UNIT
Clamping force	kN	2300
Opening Stroke	mm	550
Space between tie bars	mm x mm	620 x 620
Mold thickness(min)	mm	220
Mold thickness(max)	mm	600
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	55
POWER UNIT
Pump motor	kW	137
Heating capacity	kW	0
GENERAL
Oil tank capacity	L	122

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	6912 mm
B	1465 mm
C	430 mm
D	245 mm
E	2081 mm
F	4 x M10 L20
G	115 mm
H	143 mm
J	φ60 mm
K	115 mm
L	180 mm
M	φ4 mm
N	SR10

20L Bucket Side Entry IML Solutions Single Cavity.

NPE 2024, Milacron on show 2 cavities 20L pails side entry IML solution with co-injection technology by 1070 Ton injection molding machine with IML solutions provided by BECK.

The high lights of the system is two material 3 layors co-injection technology with will enable a use of up to 50% of re-cycled material. This technology will help to reduce the use of plastic and carbon release in the production of 20L pails. As the world leading injection mold manufacturer, the co-injection technology mold by mold master is the milestone of this system.

Unlike the Chinese will produce the 20L pails by a 650T injection molding machine with one cavity to reduce the machinery purchasing cost, the Milacron 1070T machine solution will provide the producer a more efficient solution of Pails production. With the IML solution provided by the worlding leading IML solution provider BECK, the Milacron 2 cavities IML systeem will represent an IML system of efficient, reliable with cutting edge technology.

Turn-key IML Solutions