U218TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	569
Shot weight	g	419
Shot speed	mm/s	180
Screw diameter	mm	50
Injection pressure	MPa	184
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	2180
Opening Stroke	mm	500
Space between tie bars	mm x mm	510 x 510
Mold thickness(min)	mm	200
Mold thickness(max)	mm	530
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	70
POWER UNIT
Pump motor	kW	19
Heating capacity	kW	16.3
GENERAL
Oil tank capacity	L	230

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	6000 mm
B	3270 mm
C	650 mm
D	405 mm
E	60 mm
F	1900 mm
G	1330 mm
H	1340 mm
I	764 mm
J	2200 mm
K	4690 mm
L	1840 mm
M	1010 mm
N	1050 mm
O	1470 mm

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions