SW-M650-- SWITEK High Precision Servo Injection Molding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2863
Shot weight	g	2605
Shot speed	mm/s	493
Screw diameter	mm	90
Injection pressure	MPa	117
Screw L:D ratio	--	23.3
CLAMPING UNIT
Clamping force	kN	6500
Opening Stroke	mm	920
Space between tie bars	mm x mm	925 x 875
Mold thickness(min)	mm	380
Mold thickness(max)	mm	950
Hydraulic ejection stroke	mm	280
Hydraulic ejection force	kN	180
POWER UNIT
Pump motor	kW	73
Heating capacity	kW	42
GENERAL
Oil tank capacity	L	0

Platen Dimensions

Machine Dimmension

SWITEK Turn-key 8 Cavities Cups Side Entry IML Solutions with Vision Control + Packing Solutions

Starting from $285,714

GECH IML on show turn-key IML solutions of 8 cavities Yogurt cups high speed IML production with vision control at a cycle time of 5.5s with YZY IML label and Brosen Mold by Welltec high speed injection molding machine TTI-353Sec.

The IML system is in production of Yogurt cups with a containing capacity of 100g, which is one of the most popular design of extreme thin-wall container with a thickness of 0.55mm for dairy products. And the total cycle time of 5.5s will promise the productivity of the system. It's no doubt that GECH IML has done a great job in this solutions.

The counter part of the GECH 8 cavities cups side entry IML solution, SWITEK IML Solutions in production provided not noly the vision control but also packing solutions to the IML cups producers. As a system for the production of food package, the prevention of secondary polution tend to be very important to ensure the food safety. So a system free from humam contact from injection to packing is no doubt an ideal solution.

Turn-key IML Solutions