sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 5702 |
| Shot weight | g | 5189 |
| Shot speed | mm/s | 740 |
| Screw diameter | mm | 110 |
| Injection pressure | MPa | 215 |
| Screw L:D ratio | -- | 26 |
| CLAMPING UNIT | ||
| Clamping force | kN | 13500 |
| Opening Stroke | mm | 1420 |
| Space between tie bars | mm x mm | 1380 x 1280 |
| Mold thickness(min) | mm | 600 |
| Mold thickness(max) | mm | 1350 |
| Hydraulic ejection stroke | mm | 350 |
| Hydraulic ejection force | kN | 215 |
| POWER UNIT | ||
| Pump motor | kW | 102 |
| Heating capacity | kW | 91.5 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Platen Dimensions
Machine Dimmension
Welltec Machinery new two platen injection molding machine 650JSEII was installed to the customer factory for the production of 20L paints bucket.
650JSEII is a two platen injection molding machine with a clamping force of 6500kN which provide more flexibility in the production of IML Bucket with with flexible in opening stroke. For large size bucket IML production you can choose either side entry solution with SWITEK IML Robot SW850 or a top entry solution with less investment.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
Injection Machinery News & Express
E-mail: sales@switek.biz
Injection Machinery
CopyRight © HuangYanZheng
