Systec 500/920 C SP -- Sumitomo High Speed Injection Molding Machine and IML Solutions

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2388
Shot weight	g	2173
Shot speed	mm/s	320
Screw diameter	mm	80
Injection pressure	MPa	239
Screw L:D ratio	--	24
CLAMPING UNIT
Clamping force	kN	5000
Opening Stroke	mm	850
Space between tie bars	mm x mm	920 x 920
Mold thickness(min)	mm	400
Mold thickness(max)	mm	920
Hydraulic ejection stroke	mm	260
Hydraulic ejection force	kN	96
POWER UNIT
Pump motor	kW	223
Heating capacity	kW	43
GENERAL
Oil tank capacity	L	820

Platen Dimension

Machine Dimmension

#	Value
A	322 mm
B	595 mm
C	916 mm
D Max	2193 mm
E	5392 mm
L	9225 mm
M Min	8990 mm

SA-290H is a high speed hydraulic energy-saving injection molding machine produced by FCS Machinery for the production of thin-wall food containers, bubble teacup and bubble teacup lids. The clamping force of this series of hydraulic high speed injection molding machine is range from 220Ton ~ 500T.

For thin-wall containers production, the efficiency of the system would be the key to your profit. Here I'll recommend the high speed 3 axis servo injection robot SW7112DS, with a dry cycle of 3.3s and payload up to 3kg, SW7112DS is an ideal robot for the high speed injection molding machine with a clamping force from 150Ton ~ 450Tons.

Turn-key IML Solutions