Systec 500/920 C SP -- Sumitomo High Speed Injection Molding Machine and IML Solutions

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1779
Shot weight	g	1299
Shot speed	mm/s	320
Screw diameter	mm	80
Injection pressure	MPa	186
Screw L:D ratio	--	24
CLAMPING UNIT
Clamping force	kN	5000
Opening Stroke	mm	850
Space between tie bars	mm x mm	920 x 920
Mold thickness(min)	mm	400
Mold thickness(max)	mm	920
Hydraulic ejection stroke	mm	260
Hydraulic ejection force	kN	96
POWER UNIT
Pump motor	kW	194
Heating capacity	kW	43
GENERAL
Oil tank capacity	L	820

Platen Dimension

Machine Dimmension

#	Value
A	292 mm
B	0 mm
C	0 mm
D Max	2193 mm
E	4797 mm
L	9225 mm
M Min	8990 mm

SWITEK Turn-key 8 Cavities Cups Side Entry IML Solutions with Vision Control + Packing Solutions

Starting from $285,714

GECH IML on show turn-key IML solutions of 8 cavities Yogurt cups high speed IML production with vision control at a cycle time of 5.5s with YZY IML label and Brosen Mold by Welltec high speed injection molding machine TTI-353Sec.

The IML system is in production of Yogurt cups with a containing capacity of 100g, which is one of the most popular design of extreme thin-wall container with a thickness of 0.55mm for dairy products. And the total cycle time of 5.5s will promise the productivity of the system. It's no doubt that GECH IML has done a great job in this solutions.

The counter part of the GECH 8 cavities cups side entry IML solution, SWITEK IML Solutions in production provided not noly the vision control but also packing solutions to the IML cups producers. As a system for the production of food package, the prevention of secondary polution tend to be very important to ensure the food safety. So a system free from humam contact from injection to packing is no doubt an ideal solution.

Turn-key IML Solutions