Systec 500/920 C SP -- Sumitomo High Speed Injection Molding Machine and IML Solutions

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	891
Shot weight	g	810
Shot speed	mm/s	450
Screw diameter	mm	60
Injection pressure	MPa	242
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	5000
Opening Stroke	mm	850
Space between tie bars	mm x mm	920 x 920
Mold thickness(min)	mm	400
Mold thickness(max)	mm	920
Hydraulic ejection stroke	mm	260
Hydraulic ejection force	kN	96
POWER UNIT
Pump motor	kW	124
Heating capacity	kW	23
GENERAL
Oil tank capacity	L	820

Platen Dimension

Machine Dimmension

#	Value
A	287 mm
B	0 mm
C	0 mm
D Max	2193 mm
E	3957 mm
L	8385 mm
M Min	8150 mm

Roboplas onshow 2 cavities 1.2 litter buckets side entry IML Solutions with handle assembly at Fakuma 2017.

The globalized increasing of the labour cost make it more and more difficult to make profit for low value added prarts producing. Automation of the production process would be the best way. It's no doubt that to have the handles assembled immediately after the buckets IML produced will increase the production efficiency dramatically. The Roboplas 2 Cavitites buckets IML solutions with handle assembly for sure is an ideal choice for the buckets producers.

As for similar project of a smaller budget, the IML containers can consider a turn-key system made in China. With a complete supplier chain in China and much lower labour cost compared to their European counter parts, SWITEK IML Solutions will provide a system with the cost of only around 35%~45% of their European counter parts and life long online technical support. With a turn-key solution, the mould and the IML automation system would be well tested in China before delivery to ensure that you'll receive a system of buckets IML production with handle assembly ready to work.

Turn-key IML Solutions