Systec 280/630 C SP -- Sumitomo High Speed Injection Molding Machine and IML Solutions

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	530
Shot weight	g	387
Shot speed	mm/s	510
Screw diameter	mm	50
Injection pressure	MPa	243
Screw L:D ratio	--	25
CLAMPING UNIT
Clamping force	kN	2800
Opening Stroke	mm	675
Space between tie bars	mm x mm	630 x 630
Mold thickness(min)	mm	330
Mold thickness(max)	mm	710
Hydraulic ejection stroke	mm	200
Hydraulic ejection force	kN	73
POWER UNIT
Pump motor	kW	105
Heating capacity	kW	18.3
GENERAL
Oil tank capacity	L	580

Platen Dimension

Machine Dimmension

#	Value
A	257 mm
B	446 mm
C	990 mm
D Max	1580 mm
G	2378 mm
M	7033 mm
F Min	1243 mm
S	33 mm
SH	2321 mm

JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.

In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.

To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.

Turn-key IML Solutions