Systec 160/520 -- Sumitomo High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	231
Shot weight	g	210
Shot speed	mm/s	610
Screw diameter	mm	40
Injection pressure	MPa	203
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	1600
Opening Stroke	mm	500
Space between tie bars	mm x mm	520 x 520
Mold thickness(min)	mm	275
Mold thickness(max)	mm	585
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	59
POWER UNIT
Pump motor	kW	78
Heating capacity	kW	11.1
GENERAL
Oil tank capacity	L	380

Platen Dimension

Machine Dimmension

#	Value
A	156 mm
B	-14 mm
C	992 mm
D Max	1625 mm
G	2064 mm
M	5398 mm
F Min	887 mm
S	237 mm
SH	1151 mm

Roboplas onshow 2 cavities 1.2 litter buckets side entry IML Solutions with handle assembly at Fakuma 2017.

The globalized increasing of the labour cost make it more and more difficult to make profit for low value added prarts producing. Automation of the production process would be the best way. It's no doubt that to have the handles assembled immediately after the buckets IML produced will increase the production efficiency dramatically. The Roboplas 2 Cavitites buckets IML solutions with handle assembly for sure is an ideal choice for the buckets producers.

As for similar project of a smaller budget, the IML containers can consider a turn-key system made in China. With a complete supplier chain in China and much lower labour cost compared to their European counter parts, SWITEK IML Solutions will provide a system with the cost of only around 35%~45% of their European counter parts and life long online technical support. With a turn-key solution, the mould and the IML automation system would be well tested in China before delivery to ensure that you'll receive a system of buckets IML production with handle assembly ready to work.

Turn-key IML Solutions