MARS 2500/1000G -- HaiTian Mars.G Series Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	601
Shot weight	g	547
Shot speed	mm/s	210
Screw diameter	mm	55
Injection pressure	MPa	169
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	2500
Opening Stroke	mm	540
Space between tie bars	mm x mm	570 x 570
Mold thickness(min)	mm	220
Mold thickness(max)	mm	570
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	62
POWER UNIT
Pump motor	kW	22
Heating capacity	kW	17.75
GENERAL
Oil tank capacity	L	355

Platen Dimensions

Machine Dimmension

Roboplas onshow 2 cavities 1.2 litter buckets side entry IML Solutions with handle assembly at Fakuma 2017.

The globalized increasing of the labour cost make it more and more difficult to make profit for low value added prarts producing. Automation of the production process would be the best way. It's no doubt that to have the handles assembled immediately after the buckets IML produced will increase the production efficiency dramatically. The Roboplas 2 Cavitites buckets IML solutions with handle assembly for sure is an ideal choice for the buckets producers.

As for similar project of a smaller budget, the IML containers can consider a turn-key system made in China. With a complete supplier chain in China and much lower labour cost compared to their European counter parts, SWITEK IML Solutions will provide a system with the cost of only around 35%~45% of their European counter parts and life long online technical support. With a turn-key solution, the mould and the IML automation system would be well tested in China before delivery to ensure that you'll receive a system of buckets IML production with handle assembly ready to work.

Turn-key IML Solutions