JU9000III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	5316
Shot weight	g	4837
Shot speed	mm/s	1142
Screw diameter	mm	120
Injection pressure	MPa	109
Screw L:D ratio	--	18.3
CLAMPING UNIT
Clamping force	kN	9000
Opening Stroke	mm	1600
Space between tie bars	mm x mm	1180 x 1000
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1100
Hydraulic ejection stroke	mm	300
Hydraulic ejection force	kN	195
POWER UNIT
Pump motor	kW	75
Heating capacity	kW	54
GENERAL
Oil tank capacity	L	780

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2398 mm
B	2286 mm
C	2840 mm
D	2265 mm
E	1627 mm
F	1577 mm
G	1198 mm
H	1042 mm
I	544 mm
J	4512 mm
K	4581 mm
M	3857 mm
N	1740

Hwamda Machinery has a new two platen servo injection molding machine HMD DU2100 started up in a large size dustbin injection production project without injection robot.

With European two platen injection unit, HMD DU2100 is an excellent injection molding machine for deepcavity products. In this project the machine started up without an injection robot. To maxmize the productity and for production safety, the better solution would be with a SWITEK 3 axis servo injection robot SW7518DS to pick and stack the dustbin. With a payload up to 15kg, SWITEK is an ideal choice for this project.

As a two platen injection molding machine, Hwamda HMD DU2100 provide sufficient clamping force with excellent opening stroke for deep cavity product but much shorter in length, will help to reduce the floor installation space with a maximized per square meter productivity. It's a price smart investiment for the productivity of deep cavity products.

Turn-key IML Solutions