JU6500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2262
Shot weight	g	2058
Shot speed	mm/s	548
Screw diameter	mm	80
Injection pressure	MPa	204
Screw L:D ratio	--	24.8
CLAMPING UNIT
Clamping force	kN	6500
Opening Stroke	mm	1350
Space between tie bars	mm x mm	1040 x 910
Mold thickness(min)	mm	400
Mold thickness(max)	mm	950
Hydraulic ejection stroke	mm	250
Hydraulic ejection force	kN	110
POWER UNIT
Pump motor	kW	75
Heating capacity	kW	54
GENERAL
Oil tank capacity	L	600

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2165 mm
B	2066 mm
C	2686 mm
D	2200 mm
E	1290 mm
F	1290
G	1207 mm
H	1028 mm
I	675 mm
J	3746 mm
K	4586 mm
M	3191 mm
N	1560

Welltec in house testing their new two-color injection molding machine 160P in 8 cavities closures production.

The new two-tone injection molding machine by Welltec is optional with vertical, parallel, piggyback arrangements to accomodate multi-component, multi-color injection production. With the rotary platen controlled by servo motor and extra wide tie bar spacing, it's an ideal injection molding machine for the production of 2 color parts.

With 2 sets of independent injection units, the size of two tone injection molding machine will generally larger than a regular servo injection molding machine, it would be very important that when you're choosing a robot for this kind of injection molding machine ,the length of the traverse stroke would be much longer compared to the regular injection molding machine of the same clamping force. In this case the robot for Welltec 160p should be SWITEK 3 Axis servo injection robot SW6308DS-20.

Turn-key IML Solutions