JU6500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1619
Shot weight	g	1473
Shot speed	mm/s	666
Screw diameter	mm	80
Injection pressure	MPa	120
Screw L:D ratio	--	17.5
CLAMPING UNIT
Clamping force	kN	6500
Opening Stroke	mm	1350
Space between tie bars	mm x mm	1040 x 910
Mold thickness(min)	mm	400
Mold thickness(max)	mm	950
Hydraulic ejection stroke	mm	250
Hydraulic ejection force	kN	110
POWER UNIT
Pump motor	kW	55
Heating capacity	kW	33
GENERAL
Oil tank capacity	L	450

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2165 mm
B	2066 mm
C	2327 mm
D	2200 mm
E	1290 mm
F	1290
G	1082 mm
H	903 mm
I	675 mm
J	3746 mm
K	3707 mm
M	3191 mm
N	1560

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions