JU5500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2497
Shot weight	g	2272
Shot speed	mm/s	593
Screw diameter	mm	85
Injection pressure	MPa	160
Screw L:D ratio	--	20.7
CLAMPING UNIT
Clamping force	kN	5500
Opening Stroke	mm	1300
Space between tie bars	mm x mm	920 x 830
Mold thickness(min)	mm	350
Mold thickness(max)	mm	900
Hydraulic ejection stroke	mm	250
Hydraulic ejection force	kN	110
POWER UNIT
Pump motor	kW	65
Heating capacity	kW	48
GENERAL
Oil tank capacity	L	600

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2110 mm
B	2016 mm
C	2671 mm
D	2250 mm
E	1175 mm
F	1175
G	1177 mm
H	943 mm
I	675 mm
J	3581 mm
K	4019 mm
M	3056 mm
N	1400

Turn-key 2 Cavities Pails IML Solution with Handle Assembly

Starting from $132,857

Chinaplas 2024 -- Yizumi successfully run the turn-key 2+2 cavities 1L pails IML system with handle assembly at the cycle time of 6.5s and in mold time 1.77s, attracted the attention of visitors from around the world.

Well prepared for the show, YIZUMI system supassed its counter parts of the similar solutions in Chinaplas in both smoothness of running and the cycle time. With the increased popularity of the IML pails with handle among the dairy producers, the IML solutions with the handle assembly for pails is no double would the the top choice for the contnainer producers to increase their productivity and reduce the production cost.

The high lights of the system is that to have the handle and pails in the same mold, the package producer will need only one sets of machinery to produce the IML pails with handle well assembled instead of two. It's an economic and eco-friendly solution of IML pails with handle production.

Turn-key IML Solutions