JU4500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	3456
Shot weight	g	3145
Shot speed	mm/s	821
Screw diameter	mm	100
Injection pressure	MPa	116
Screw L:D ratio	--	17.6
CLAMPING UNIT
Clamping force	kN	4500
Opening Stroke	mm	1050
Space between tie bars	mm x mm	810 x 800
Mold thickness(min)	mm	350
Mold thickness(max)	mm	850
Hydraulic ejection stroke	mm	250
Hydraulic ejection force	kN	110
POWER UNIT
Pump motor	kW	45
Heating capacity	kW	33
GENERAL
Oil tank capacity	L	450

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2070 mm
B	1986 mm
C	2317 mm
D	2300 mm
E	1084 mm
F	1084
G	1082 mm
H	903 mm
I	675 mm
J	3269 mm
K	3597 mm
M	2774 mm
N	1248

Arge Automation double arms top entry IML solutions for 1 cavity bucket synchronous IML production

For double arms top entry IML solutions it's mostly a solution for the production of IML Lids to have a synchronous parts picking and labeling for a higher production efficiency but not increase the size of the injection molding machine too much. To have a double arms top entry IML solution for the production of IML bucket is a brave adenture in system design because an injection molding machine with sufficient opening stroke will increase the cost of the system dramatically.

A better solution for efficient IML production of IML production would be a Side Entry IML Robot which will have a much better consistence of the parts and much shorter in mold time for a higher productivity. Any, ARGE have a double arms top entry IML robot for the production of IML buckets is a new try and provide more opportunities to the small and medium size IML buckets producers.

Turn-key IML Solutions