Two Platen Injection Molding Machine FA900 -- LK Technology Holidings Limited

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	3925
Shot weight	g	3572
Shot speed	mm/s	918
Screw diameter	mm	100
Injection pressure	MPa	191
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	9000
Opening Stroke	mm	1600
Space between tie bars	mm x mm	1180 x 1000
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1100
Hydraulic ejection stroke	mm	300
Hydraulic ejection force	kN	350
POWER UNIT
Pump motor	kW	120
Heating capacity	kW	49
GENERAL
Oil tank capacity	L	1800

Platen Dimension

Machine Dimmension

#	Value
A	3022 mm
B	1517 mm
C	1505 mm
D	1397 mm
E	1387 mm
F	2100 mm
G	1600 mm
H	1498 mm
I	2280 mm
J	1500 mm
K	1730 mm
L	2425 mm
M	2138 mm
N	2200 mm

Welltec put in market new all electric injection molding machine 550HD with PC/PMMA special plasticizing components for high end applications.

The new all electric injection molding machine 550HD was tested in the factory of Welltec in production of two cavities optical parts for automotive with a TOOLCEN injection robot. The new HD series large scale all electric injection molding machine by Welltec machinery is optimized for the production of light guide strips and thick wall light guides with high performance servo motors and precision ball screw to achieve a precisized injection of 0.01mm. And the product weight repeatability can be up to 1%, which is an ideal injection molding machine for PC/PMMA optical parts injection production.

The recommended robot for this injection molding machine would be SWITEK 3 axis servo injection robot SW6715DS which is a medium size servo robot with a payload up to 15kg and will provide reliable stability and repeat precision for the production of PC/PMMA optical parts. To further increase the productivity and quality of the optical parts, a runner cutting unit and optical vision control unit can also be introduced into the system to create a turn-key solution of optical parts production.

Turn-key IML Solutions