Two Platen Injection Molding Machine FA2500 -- LK Technology Holidings Limited

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	14130
Shot weight	g	12858
Shot speed	mm/s	1628
Screw diameter	mm	150
Injection pressure	MPa	179
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	25000
Opening Stroke	mm	3000
Space between tie bars	mm x mm	1900 x 1700
Mold thickness(min)	mm	800
Mold thickness(max)	mm	1800
Hydraulic ejection stroke	mm	550
Hydraulic ejection force	kN	660
POWER UNIT
Pump motor	kW	288
Heating capacity	kW	112
GENERAL
Oil tank capacity	L	2500

Platen Dimension

Machine Dimmension

#	Value
A	4357 mm
B	2216 mm
C	2141 mm
D	1964 mm
E	1964 mm
F	3800 mm
G	3000 mm
H	1579 mm
I	2232 mm
J	2232 mm
K	2185 mm
L	3611 mm
M	2326 mm
N	3345 mm

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions