sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 8279 |
| Shot weight | g | 7534 |
| Shot speed | mm/s | 1291 |
| Screw diameter | mm | 125 |
| Injection pressure | MPa | 198 |
| Screw L:D ratio | -- | 24 |
| CLAMPING UNIT | ||
| Clamping force | kN | 16000 |
| Opening Stroke | mm | 2600 |
| Space between tie bars | mm x mm | 1550 x 1450 |
| Mold thickness(min) | mm | 700 |
| Mold thickness(max) | mm | 1550 |
| Hydraulic ejection stroke | mm | 400 |
| Hydraulic ejection force | kN | 490 |
| POWER UNIT | ||
| Pump motor | kW | 216 |
| Heating capacity | kW | 92 |
| GENERAL | ||
| Oil tank capacity | L | 1800 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 3781 mm |
| B | 1928 mm |
| C | 1853 mm |
| D | 1675 mm |
| E | 1675 mm |
| F | 3300 mm |
| G | 2600 mm |
| H | 1549 mm |
| I | 2232 mm |
| J | 1940 mm |
| K | 2245 mm |
| L | 3130 mm |
| M | 2264 mm |
| N | 2915 mm |
Welltec in house testing new all electric injection molding machine for medical application 190D with 48 cavities luer lock for syringe picked by Samfacc 3 Axis servo injection robot.
The new D series all electric injection molding machine by Welltec machinery is an injection molding machine designed for precise injection with high productivity. In this project it's producing the luer lock which is a protective cap for syringe. The total cycle time is 12s with robot and the weight of the part is 0.6g/pcs. With ultra rigid structure, the deformation at the hgihest pressure injection is ≤0.05mm with an injection repeatability of ±0.01mm.
In this application, the parts was picked with a Samfacc 3 axis servo Injection Robot. For an all electric injection molding machine, the robot selection can based on the size of the machine, the weight of the parts + EOAT, the total cycle time and the production environment requirement. The medical parts must be produced in a clean room, it'll request the robot to have suitable installation height, free from oil and dust during production and stability during picking and placing to ensure the precision of the parts. It's better to have the robot custom made for the project.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
Injection Machinery News & Express
Chinaplas 2023 | Yizumi will Demo LED Bead Molding Solution with New All Electric Injection Molding Macine FF200
E-mail: sales@switek.biz
Injection Machinery
CopyRight © HuangYanZheng