HMD 368M8-SPV -- High Speed Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	475
Shot weight	g	432
Shot speed	mm/s	400
Screw diameter	mm	55
Injection pressure	MPa	200
Screw L:D ratio	--	25.3:1
CLAMPING UNIT
Clamping force	kN	3680
Opening Stroke	mm	640
Space between tie bars	mm x mm	670 x 650
Mold thickness(min)	mm	270
Mold thickness(max)	mm	670
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	77
POWER UNIT
Pump motor	kW	90
Heating capacity	kW	28.5
GENERAL
Oil tank capacity	L	420

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	1900 mm
B	7192 mm
C	7417 mm
D	2366 mm
E	1808 mm

SA-330P is a servo hydraulic energy-saving injection molding machine by FCS Machinery which is suitable for the production of bucket container. This series of injection molding machine have a clamping force range from 220Tons ~ 1000Tons. In the video FCS is trying the production of disposable tablewares.

For the production of disposable tableware, there're a couple of solutions. The basic automatio solution would be to pick the table wares out with a high speed 3 axis injection robot SW7112DS; You can also choose to have it Single PCS Packed or have it Bag Packed or Box packed. With more than 17 years cooperating with the mold maker and injection molding machine manufacturers, SWITEK is experienced to provide you with a turn-key disposable tableware injection production solutions.

Turn-key IML Solutions