EL230/560 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	286
Shot weight	g	260
Shot speed	mm/s	160
Screw diameter	mm	45
Injection pressure	MPa	196
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	2300
Opening Stroke	mm	550
Space between tie bars	mm x mm	610 x 610
Mold thickness(min)	mm	250
Mold thickness(max)	mm	680
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	52
POWER UNIT
Pump motor	kW	24
Heating capacity	kW	17.35
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	6396 mm
B	1195 mm
C	1667 mm
D	430 mm
E	1388 mm
F	311 mm
G	1801 mm
H	21611 mm
I	φ100 mm
J	φ3 mm

Roboplas onshow 2 cavities 1.2 litter buckets side entry IML Solutions with handle assembly at Fakuma 2017.

The globalized increasing of the labour cost make it more and more difficult to make profit for low value added prarts producing. Automation of the production process would be the best way. It's no doubt that to have the handles assembled immediately after the buckets IML produced will increase the production efficiency dramatically. The Roboplas 2 Cavitites buckets IML solutions with handle assembly for sure is an ideal choice for the buckets producers.

As for similar project of a smaller budget, the IML containers can consider a turn-key system made in China. With a complete supplier chain in China and much lower labour cost compared to their European counter parts, SWITEK IML Solutions will provide a system with the cost of only around 35%~45% of their European counter parts and life long online technical support. With a turn-key solution, the mould and the IML automation system would be well tested in China before delivery to ensure that you'll receive a system of buckets IML production with handle assembly ready to work.

Turn-key IML Solutions