EL180/430 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	201
Shot weight	g	182
Shot speed	mm/s	200
Screw diameter	mm	40
Injection pressure	MPa	216
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	1800
Opening Stroke	mm	470
Space between tie bars	mm x mm	560 x 560
Mold thickness(min)	mm	200
Mold thickness(max)	mm	600
Hydraulic ejection stroke	mm	120
Hydraulic ejection force	kN	34
POWER UNIT
Pump motor	kW	24
Heating capacity	kW	12.52
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	5742 mm
B	1047 mm
C	1576 mm
D	380 mm
E	1303 mm
F	301 mm
G	1611 mm
H	2067 mm
I	φ100 mm
J	φ3 mm

Today I find an interested video in youtube published by FCS Machinery to demonstrate the two tone injection production of 680ml airtight container by their new All-Electric two-component injection molding machine CT-230R which was designed for the production of two-component and multi-component products, including electronic parts, medical appliance, cosmetic containers, etc.

Although it's a 230Ton machine, but as a two-component injection molding machine its size will usually much larger than the standard servo injection molding machine, the robot to recommend here is SW6710DS-20 which is a 3 axis servo injection robot with a payload up to 6kg. Stable and efficient as it's, for sure will help you greatly in your production.

Turn-key IML Solutions