EL100/260 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	102
Shot weight	g	92
Shot speed	mm/s	200
Screw diameter	mm	32
Injection pressure	MPa	264
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	1000
Opening Stroke	mm	360
Space between tie bars	mm x mm	465 x 405
Mold thickness(min)	mm	150
Mold thickness(max)	mm	510
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	25
POWER UNIT
Pump motor	kW	18
Heating capacity	kW	8.22
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	5026 mm
B	818 mm
C	1414 mm
D	310 mm
E	1207 mm
F	291 mm
G	1515 mm
H	1960 mm
I	φ100 mm
J	φ3 mm

Welltec in house testing their new two-color injection molding machine 160P in 8 cavities closures production.

The new two-tone injection molding machine by Welltec is optional with vertical, parallel, piggyback arrangements to accomodate multi-component, multi-color injection production. With the rotary platen controlled by servo motor and extra wide tie bar spacing, it's an ideal injection molding machine for the production of 2 color parts.

With 2 sets of independent injection units, the size of two tone injection molding machine will generally larger than a regular servo injection molding machine, it would be very important that when you're choosing a robot for this kind of injection molding machine ,the length of the traverse stroke would be much longer compared to the regular injection molding machine of the same clamping force. In this case the robot for Welltec 160p should be SWITEK 3 Axis servo injection robot SW6308DS-20.

Turn-key IML Solutions