Servo Hydraulic Injection Molding Machine 130SEIII -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	251
Shot weight	g	229
Shot speed	mm/s	205
Screw diameter	mm	40
Injection pressure	MPa	172
Screw L:D ratio	--	20.5
CLAMPING UNIT
Clamping force	kN	1300
Opening Stroke	mm	430
Space between tie bars	mm x mm	410 x 410
Mold thickness(min)	mm	145
Mold thickness(max)	mm	450
Hydraulic ejection stroke	mm	120
Hydraulic ejection force	kN	41
POWER UNIT
Pump motor	kW	72
Heating capacity	kW	9.3
GENERAL
Oil tank capacity	L	200

Platen Dimension

Machine Dimmension

#	Value
A	1700 mm
B	1486 mm
C	1936 mm
D	3878 mm
E	4586 mm
F	1104 mm
G	1203 mm
H	650 mm
I	800 mm
J	660 mm
K	601.5 mm

Turn-key 2 Cavities Pails IML Solution with Handle Assembly

Starting from $132,857

Chinaplas 2024 -- Yizumi successfully run the turn-key 2+2 cavities 1L pails IML system with handle assembly at the cycle time of 6.5s and in mold time 1.77s, attracted the attention of visitors from around the world.

Well prepared for the show, YIZUMI system supassed its counter parts of the similar solutions in Chinaplas in both smoothness of running and the cycle time. With the increased popularity of the IML pails with handle among the dairy producers, the IML solutions with the handle assembly for pails is no double would the the top choice for the contnainer producers to increase their productivity and reduce the production cost.

The high lights of the system is that to have the handle and pails in the same mold, the package producer will need only one sets of machinery to produce the IML pails with handle well assembled instead of two. It's an economic and eco-friendly solution of IML pails with handle production.

Turn-key IML Solutions