sales06@switek.biz
+86 186 5927 5869
# | Name | Value |
---|---|---|
1 | Model No.: | SW6710DS-20 |
2 | For IMM: | 150~320 Ton |
3 | Payload: | 8 kg |
4 | Dry Cycle Time: | 7 s |
5 | Height: | 1930 mm |
# | Name | Value |
---|---|---|
1 | X1 | 1025 mm |
2 | X2 | 840 mm |
3 | X3 | 0 mm |
4 | X4 | 0 mm |
5 | Y | 1000 mm |
6 | Z | 1750 mm |
7 | YM1 | 475 mm |
8 | YM2 | 525 mm |
9 | W | 1610 mm |
10 | L | 2780 mm |
11 | H | 1930 mm |
12 | Hs | 620 mm |
# | Name | Value |
---|---|---|
1 | For IMM | 150 ~ 320 Ton |
2 | Traverse Stroke (Z) | 1750 mm |
3 | Vertical Stroke (Y) | 1000 |
4 | Cross Wise Stroke (X) | 840 |
5 | Drive | axis3t |
6 | Motor Power (X) | 400 W |
7 | Motor Power (Y) | 750 W |
8 | Motor Power (Z) | 750 W |
9 | Vacuum | 2 |
10 | Chuck Pipe | 2 |
11 | In Mould Time | 3 s |
12 | MAX Line Speed | X:2.5 Y:2 Z:2 |
13 | Dry Cycle Time | 7 s |
14 | Power (KVA) | 2.5 |
15 | Power Input | AC220V/1PH |
16 | Working Pressure | 5~7 kgf/cm2 |
17 | Air Consumption | 2.5 NL/Cycle |
18 | Payload | 8 kg |
19 | Net Weight | 500 kg |
20 | Gross Weight | 530 |
21 | Dimension | L 2780 mm |
W 1610 mm | ||
H 1930 mm |
SWITEK new side entry IML solution for 2 cavities buckets IML production with handle assembly successfully started in the factory of our customer for bulk production.
The new system started up is the 9th IML system of the same for buckets with handle assembly. As the most economic IMl production solution for the buckets with handle, the system integrated the handle assembly unit to the IML robot to have the handle assembly immediately afte the buckets produced to increase the productivity of the system and reduce the label cost. With different size, it's possible to achieve a total cycle time of only 7s for a 2 cavities system of 1L bucket.
Although it's the most economic way to produce an IML bucket with a handle assembled, but it is not easy to have a stable and efficient system which will provide a continued production of the IML buckets. The key to a successful IML system for bucket with handle assembly is that the quality of the mold, a mold of precise injection and easy demoulding will ensure a free picking of the bucket and handles buy the robot and easy assembly, a high quality hot runner system is no doubt the cornerstone to a high quality mould.
Working with one of the leading thin-wall containers mould maker in China Mould-tip, SWITEK will provide clients around the world a turn-key IML solutions of 2 cavities IML buckets with handle assembly.
Injection Machinery News & Express
E-mail: sales@switek.biz
Injection Machinery
CopyRight © HuangYanZheng