Buy Plastic Dryer -- China Machinery Manufacturer

YJ-75

Dehumidifying Plastic Dryer

#	Name	Unit	Value
1	Model #:		YJ-75
2	Loading Capacity	Liter	130
2	Loading Capacity	kg	75
3	Heater Power	kw	2.4
4	Blower Power	kw	0.1
5	Loader Blower	Dryer	0.75
5	Loader Blower	Injection	0.75
6	Drying Capacity	kg/hr	24.8
7	Compressed Air Supply	Compressor	2.2 kw
7	Compressed Air Supply	Air Flow	190 L/min
8	Dimensions	L (mm)	980
		W (mm)	650
		H (mm)	2100
9	Net Weight	kg	280
10	Suitable IMM	Ton	100~150

Feastures of 3 in 1 Dehumidification Dryer

A 3 in 1 dehumidification dryer is a device which integrated the function of air dehumidification, material drying and material loading which will have the plastic material dried with a -40° dew point air.

A dehumidification dryer integrated the functions of dehumidification, drying and feeding of the material
A stable supply of dehumidified air with a dew point of -40° to ensure that the raw materials are fully dried
Down-blown drying hopper prevents heat loss and ensures stability and uniformity
Microcomputer P.LD control system, easy to operate
The closed loop dehumidification and material conveying system will prevent the dried raw materials from being re-moisturized due to the contacting with outside air

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Injection Machinery News & Express