GuangDon Zoneke Technology Co., Ltd. on Show Peripheral Machinery for Injection Molding at Chinaplas 2025

High Performance Injection Robotic Arms

GuangDong Zoneke Technology Co., Ltd., the manufacturer of peripherial machinery for injection molding established in 2014, on showed their robotic arms and other peripheral machinery like industrial chiller at Chinaplas 2025.

Certified with ISO9001, Zoneke Technology is designated to provide clients with peripheral machinery which include:

Robotic Arms for Injection Molding
- Three Axis Servo Injection Robot
- Five Axis Servo Injection Robot
- Swing-arm Sprue Picking Robotic Arm
Mould Temperature Controller
Dehumidifying and Dryer for Plastic Material
Dosing and Mixing Machinery
Granulator and Recycling System
Loader and Conveyor

With the products on show Chinaplas 2025, GuangDong Zoneke Technology has now the capability to provide a one-stop purchasing service of the peripheral machinery for injection molding and to take over the project of whole factory planning such as the installation the power and chilling water supply, the central feeding system of the material of a clean production workshop.

Best Buy Robotic Arm for Injection Molding Machine

SW6712DS-20

Unit: mm

X1	X2	X3	X4	Y	YM1	YM2	Z	L	W	H	Payload
1025	840	0	0	1200	475	725	2000	3020	1610	2050	8kg

The Application of End of Robotic Arm Tooling

EOAT Assembly Demonstration -- Two Cavities Parts Picking EOAT with Runner Cutting by Air Nipper

Two Cavities Parts Picking EOAT with Runner Cutting by Air Nipper

Product Descriptions

This EOAT is for 2 Cavities Parts Picking;
The Parts Would be Picked with Clamping;
The Sprue Gripper is Included for Sprue Gate Gripping;
The Sprue Gate Would be Cut by Air Nipper;
The Gross Weight of the EOAT Seet is about 1.5kg.

Bom List

Product Name	PN #	Model	Quantity
Sus Tube	4.Y00021	PST12-1500	2
Air Nipper	1.Y00004	GT-NY25	2
Straight Blades for Plastic	1.Y00037	NY25AJ	2
Fixing Block	7.Y00633	SCE2-25	2
Tube Plugs	1.Y03638	PST12-1500	11
Cross Connector	7.Y00027	SMBT-2012	2
Access Robot Bracket	7.Y00002	SMBH1-12M6	6
L-Type Thread Hose Fitting	1.Y02809	APL6-M5	3
Slide Bracket	7.Y00004	SCF4-1240W16	7
Slide Bracket	7.Y00001	SMBS-12T16	7
Sprue Gripper	8.Y00091	GR12-12-CN	1
Cross Connector	7.Y00020	SMBT-1212	1

Q & A About Robotic Arms and Injection Automation

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

GuangDon Zoneke Technology Co., Ltd. on Show Peripheral Machinery for Injection Molding at Chinaplas 2025

Best Buy Robotic Arm for Injection Molding Machine

The Application of End of Robotic Arm Tooling

Two Cavities Parts Picking EOAT with Runner Cutting by Air Nipper

Q & A About Robotic Arms and Injection Automation

Contact SWITEK Robot On WhatsApp.