sales06@switek.biz
+86 186 5927 5869
Abonnieren Sie uns
sales06@switek.biz
+86 186 5927 5869
Abonnieren Sie uns
U265TS -- SONLY Energy Saviting Servo Injection Molding Machine
The U265TS high precision injection molding machine is the SONLY TS series of injection molding machine with a clamping force of 2650kN. The injection unit of the TS series of injection molding machine was designed with the cutting edge energy-saving servo control technology with the bridge beam injection unit to ensure a smooth injection molding process and a perfect repeat precision of the parts. Which is the priority of an injection molding machine for a product like pipe strap which has strict requirement of the size coherence.
The Dimension of Sonly U265TS Energy Saving Servo Injection Molding Machine
Unit: mm
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6450 | 3430 | 735 | 390 | 60 | 2000 | 1510 | 1290 | 765 | 2400 | 4920 | 1920 | 1060 | 1100 | 1600 |
The Platen Size of Sonly U265TS Energy Saving Servo Injection Molding Machine
The solution show up is an automation system for the injection production of the PVC pipe strap of 4 cavities.Of which the automation system will finish the feeding and inserting of the nuts, the PVC pipe straps picking, the runner cutting by the SWITEK 3 axis servo injection robot SW6710S. The high light of the system is the EOAT design, of which the parts picking and nuts in mold insertion would be done by one robotic arm.
For the producer of the PVC Pipe Strap with an automation system, a 4 cavities configuration of the mold design would be a price smart investment. With an injection molding machine around 250T such as Sonly U265TS, it'll a perfect balance of the productivity of the system against the investment. And with the in mold insertion and runner cutting done by automation system, it'll help the PVC pipe strap producers to reduce the production cost and increase the production efficiency.
SW818
Unit: mm
| X1 | X2 | X3 | X4 | Y | YM1 | YM2 | Z | L | W | H | Payload | 190 | 190 | 0 | 0 | 400 | 0 | 0 | 2100 | 2730 | 2410 | 1720 | 5kg |
|---|
EOAT Assembly Demonstration -- One Cavity Car Threshold Strip Picking EOAT
Product Descriptions
YIZUMI P350 or P380K3, which one would be a better choice for your IML project?
P350 is a high speed injection molding machine designed for thin-wall containers while P380K3 is the third generation of high speed injection molding machine by YIZUMI designed for thin-wall containers. With 30 Tons more in clamping force, does it mean that P380K3 will compatible to the molds designed according to the parameters of P350?
In one just finished IML project we encountered something embrassing. There's one mold designed according to the parameter of YIZUMI P350, and we have a P380K3 in our system testing workshop, but when the mold received we find that the mold thinkness exceeded the max mold thickness of the P380K3. After double check the parameters of both the injection molding machine we found that Mold thickness allowed for P350 is 300~750mm while the mold thickness for P380K3 is only 250~650mm. And the Max Daylight of P380K3 is 160mm less than P350.
Then how to choose between, which one would be a better choice for your IML project? It would be depends on the size of the parts of which you're producing. For smaller container 30 Tons more clamping force with 160mm less max daylight means that the injection molding machine will have a less mold Open/Close time and result in a higher productivity while for larger size containers P350 will allow you to install a thicker mold, it would be more friendly to an IML project of deep cavity containers.
For more insights of the cutting edge IML technology please feel free to contact Adams from SWITEK, your personal consultant of IML Solutions.
