sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
SWITEK new double arms robotic arm custom made for the stack mold parts picking is having the final in houst testing before delivery. The robot arm is an alternative double main arms 5 axis servo robotic arm out of the SWITEK standard version SW6715D which has the vertical stroke of the robotic arm increased from 1500mm to 1800mm to make it suitable for the injtection molding machine up to 1000T. With a payload up to 15kg, it's suitable for the picking and stacking of light weight parts such as the hangers from a stack mould by an injection moldign machine up to 1000T.
When we're talking about a stack mold, what will come to your mind first? The crazy cost? The complex maintenance or injection molding process? Yes the stack mold injection molding system is unfriendly to small and medium size producers of the injection molding, but for some parts such as the petri dish, the hangers or the large size plates, a stack mold injection molding system has overwhelming advantage against the single mold to maximize the productivity of the injection molding machine with mold cavities.
In a stack mold injection molding system, a double arms robotic arm can not only pick the parts from the stack mold but also more complex operation such as the plastic parts assembly. The same robot SW6718D was used in the children garden table injection molding and assembly system to finish the production process from the parts picking to the final assembly of the children garden table.
The SW6718D is the largest double arm robotic arm of SWITEK SW67 series of robot with a payload up to 15kg. It had been continually optimized both structurally and the control system. As one of the classical robotic arm for injection molding, the SW6718D has below advantages:
To make the robot safe and reliable we choose the Panasonic servo motor and motor driver as the driving system with the high quality THK slide rail and slider to ensure the stable working of the robotic arm with a perfect repeatibility.
Anyway the SW6718D is a large size robotic arm for injection molding machine up to 1000T, a well lubricated system will help to ensure the safety of the injection molding system and make the maintenance of the robotic arms much easier.
To enable a more complex EOAT application, 4 Air In + 4 Air Out are installed to the robot to make it possible to be easily integrated into a complex injection automation system.
The SW6718D is just an expample how is SWITEK R&D team will design a robotic arm which is the best both structually and systematically for a specific injection molding automation system. GuangDong SWITEK Technology Co., Ltd. is your reliable supplier of robotic arm for your injection molding automation system.
SW6715D
Unit: mm
| X1 | X2 | X3 | X4 | Y | YM1 | YM2 | Z | L | W | H | Payload | 1900 | 734 | 450 | 1150 | 1500 | 450 | 1050 | 2300 | 3120 | 2350 | 2400 | 15kg |
|---|
EOAT Assembly Demonstration -- One Cavity Car Bumper Picking EOAT
Product Descriptions
Why There's An Additional Static Charge Ring Installed to Some IML System?
For visitors of SWITEKK website will find that for the IML system no matter if it's side entry IML robot or Top Entry IML Robot, you can see a ring just outside the mold area in some of the IML system but not to the other IML system. Why would it happen and what's the function of this ring to the IML system?
The ring installed is a static charging ring. For a better understanding of the function of this static charging ring we'll need to know the types of the labels which we're using in an IML project. For an IML container made from PP (Polypropylene) there're two main types of IML labels, the regular material IML labels which could be easily static charged from the inner side of the label and the metallic label of which has a metallic layer will releas the static immediately. In this case we'll need to have the label static charged from outside of the label. That's why an extra static charging ring is to be installed to the IML system to ensure that the metallic IML label could be well static charged.
For more knowledge about IML and IML solutions just follow up https://www.gechiml.com for the up to date solutions of IML from SWITEK automation and contact Adams for a turn-key solutions of IML.
