SAMFACC on show 3 axis servo telescopic injection robotic arm with demonstration of multi-position picking and placement on conveyor at PlastImagen 2025. Of which the robot is suitable for injection molding machine with clamping force up to 5000kN.

Established in 2013, Foshan Samfacc Robot Co., ltd. is one of the robotic arm manufacturer in China known for their price competitive high speed 3 axis servo injection robot for thin-wall containers pcking and stacking. With years of fearce competition in the market, SAMFACC has now expanded their production line to:

• Swing arm SP series sprue picking robot
• SFK Series high speed robotic arms for injection molding
• SFK-WD Series double arms high speed robotic arms for injection molding
• SFNK Series high speed robotic arms for injection molding
• SF Series standard robotic arms for injection molding
• FN Series heavy duty robotic arms for injection molding
• Top entry IML System
• Side entry IML System
• Cutlery packing system

The robotic arm on show PlastImagen 2025 is a standard robot of SFN series with payload up to 15kg for the injection moding machine up to 800T. It's designed for the application of parts picking, in mold insertion etc. in an injection molding system.

PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?

PVC Pipe Fittings Runner Cutting Solutions

For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:

• Injection Molding Machine: HaiTian MA4500
• Picking Robot: SWITEK SW6712S 3 Axis Servo Injection Robot
• Mold Design: 16 Cavities
• Air Nipper: 4pcs
• Cycle Time: 60s

The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.

For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.