sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
The installation dimension of the electric box for SWITEK top entry robotic arm is based on the installation dimension of the HC-S3/HC-S5 series of control units. Please rever to the drawings below if there's a replacement of the boards in your robotic arms maintenance works.
SW6710S
Unit: mm
| X1 | X2 | X3 | X4 | Y | YM1 | YM2 | Z | L | W | H | Payload | 900 | 750 | 0 | 0 | 1000 | 420 | 580 | 1750 | 2780 | 1610 | 1930 | 8kg |
|---|
EOAT Assembly Demonstration -- One Cavity Instrument Panel Picking EOAT
Product Descriptions
Why So Many Cutlery Producers Will Choose a Submarine Gate Cold Runner Mold for Their Cutlery Auto-packing Solutions?
Plastic (PP + CA/PLA) cutlery of different size are widely used around the world with a booming demand of "Takeout" food in a fast-paced life nowadays. And as an easy to produce products more and more plastic factory owners joint this business. But for the new producers of cutlery, how to make your investment rewardable?
To producce a plastic cutlery (Knife, Forks and Spoon) the producer will need an injeciton molding machine, the mold and the automation system. For the automation system it could be a robot only for manually packing or robot + auto-packing system for a cutlery auto-packing system. For the mold the cutlery can either choose a hot runner mold or a cold runner mold. But more and more producer will choose a submarine gate cold runner mold, why?
The most important is the cost advantage of a submarine gate cold runner mold against a hot runner one. As a low value added products most of the cutlery producing system are low budget project, and reduction of the investment means an increase of the profit in the future.
For more ideas about a cutlery auto-packing solution please contact Adams from SWITEK to get a turn-key solution of cutlery packing.
