Abstract

The main page is the human/machine interface of the SWITEK side entry petri dish packing system after power on, where the operator of the petri dish packing system start the programming, the parameters setting of petri dish packing system. Here in this chapter we'll introduce the function of the buttons.

No.	Description
1	Mold Open (OFF)
2	Mold Close (OFF)
3	Mold Close Finished (OFF)
4	Change Label (OFF)
5	Start (OFF)
6	Pause (OFF)
7	Emergency Stop (OFF)
8	Manual (OFF)
9	Origin (ON)
10	Auto-display
11	Origin Display
12	Crurrently Stacked
13	The Current Position of Axis
14	Auto Mode
15	Manual Mode
16	System Parameters
17	Position Setting
18	Position Interface
19	Alarm Interface
20	IO Monitor

Best Buy Robotic Arm for Injection Molding Machine

SW6710

Unit: mm

X1	X2	X3	X4	Y	YM1	YM2	Z	L	W	H	Payload
1055	607	288	607	1000	420	580	1750	2340	1700	2190	8kg

The Application of End of Robotic Arm Tooling

EOAT Assembly Demonstration -- Two Cavities Parts Picking EOAT with Runner Gripping

Two Cavities Parts Picking EOAT with Runner Gripping

Product Descriptions

This EOAT is for 2 Cavities Parts Picking;
The Parts Would be Picked with Vacuum Cup;
The Sprue Gripper is Included for Sprue Gate Gripping;
The EOAT has the Air Circuit Divided into Two Suction Route and one Gripping Route;
The Gross Weight of the EOAT Seet is about 2kg.

Bom List

Product Name	PN #	Model	Quantity
Quick Changer	7.Y00175	QCS-G100	1
Sprue Gripper	8.Y00050	GR12-12CP	1
Plugs for Profile	4.Y00069	PEP2518	10
Cross Mounting Bracket for Profiles	7.Y00194	SMBA-2525T	6
Extruded Profile	4.Y00455	PEP2518-1000	2
Vacuum Cups VS2 Series	1.Y03085	VS2-SA11	6
Vacuum Cup Fitting	7.Y00703	VM-02-G18	6
Rotative Suspensions	8.Y00061	VFR1421-G18	6
Mounting Bracket	7.Y00200	SMBE1-1440T	6
Connector	1.Y02510	APF-M5	2
Side Manifold Block	7.Y00157	SMB-06M5	2
L-Type Threaded HOse Fitting	1.Y02722	APL6-01	8
Straight Threaded Hose Fitting	1.Y02725	APC6-01	6

Q & A About Robotic Arms and Injection Automation

What's the advantage of SWITEK SW8 Series IML Robot?

Since unveiled in Chinaplas 2010, the SW8 Series of IML robot by SWITEK Automation had been continuously optimized for the production of various IML parts with different cycle time by matching different injection molding machines. The target of SWITEK is to make a series of IML robots which are efficient buy price smart for samll and medium size IML container producer. With this idealogy, the SW8 Series IML robot has the advantages below:

With modular design, it's easy to change the magazine and mandral for different parts to be produced by the same IML robot.
Toch screen control, operator friendly interface.
Standard parts, easy to get for replacement.
With European control system available, possible cycle time lower to 2s.
Suitable for parts from lids labeling to 20L pails IML Production.

SWITEK Side Entry Petri Injection Automation System Operation Instruction -- Main Page

TURNKEY PETRI DISP AUTO-PACKING SOLUTIONS