sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
The PowerJet KF300-S8 is a high speed hydraulic injection molding machine designed for the fast injection molding of the thin-wall containers with a clamping force of 3000kN and injection rate up to 503g/s. For an IML project of 2 cavities 1kg sweat box 5 faces labeling the PowerJet KF300-S8 is a price smart choice as the injection molding machine. With innovative design of low-temperature injection molding, the PowerJet KF300-S8 is an energy-saving injection molding machine for the production of thin-wall containers with high tenacity and toughness.
The Robotic Arms Installation Reference of PowerJet KF300-S8
| A | B | C | D | E | F | G | H | M |
|---|---|---|---|---|---|---|---|---|
| 560 | 140 | 35 | 8-M20x40 | 840 | 840 | 455 | 460 | 140 |
Unit:mm
The Platen Size of Powerjet KF300-S8 High Speed Injection Molding Machine
The 1kg rectangular 5 faces IML labeling sweat box is a seasonal products in India. The SWITEK 2 cavities 1kg sweat box side entry 5 faces IML labeling solution is an economic solution of IML production of the sweat box with the latest version of SWITEK high speed side entry IML robot SW833-S6, which is a universal side entry IML robot suitable for the small and medium size thin-wall containers IML production by injection molding machine up to 500T.
To have the PowerJet KF300-S8 as the injection molding machine for the 2 cavities 1kg rectangular sweat box IML production is a budget smart solution. As one of the oldest manufacturer of high speed injection molding machine for thin-wall packages, the combination of PowerJet KF300-S8 and SWITEK high speed IML robot SW833-S6 will provide the producers of the IML containers a competitive IML solution.
SW6712D-20
Unit: mm
| X1 | X2 | X3 | X4 | Y | YM1 | YM2 | Z | L | W | H | Payload | 1025 | 605 | 250 | 590 | 1200 | 475 | 725 | 2000 | 3020 | 1610 | 2050 | 8kg |
|---|
EOAT Assembly Demonstration -- One Cavity Car Threshold Strip Picking EOAT
Product Descriptions
Is there any Low Budget Solutions for PVC Pipe Fittings Runner Cutting?
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
