Abstract

The TIMER is for the setting of the "Delay Time" between each step in the program of the IML robot. Here in this video we'll introduce the types and settings of the Timers provided in the SWITEK IML robot control system and how is it to be added in the IML robot program.

No.	Name	Function
(1)	Timer seletion	Click to switch timer intervals.
(2)	?	Click to view the timer description at (5).
(3)	Time setting	Click Modify timer value.
(4)	Page	Click to switch timer intervals.
(5)	Description	Timer description display.

You can set the value of the timer whenever you use it in the program. The value can also be modified when the IML robot is running automatically.

Best Buy Robotic Arm for Injection Molding Machine

SW6715DS

Unit: mm

X1	X2	X3	X4	Y	YM1	YM2	Z	L	W	H	Payload
1400	1180	0	0	1500	480	1020	2500	3120	2200	2400	15kg

The Application of End of Robotic Arm Tooling

EOAT Assembly Demonstration -- Two Cavities Parts Picking EOAT with Runner Gripping

Two Cavities Parts Picking EOAT with Runner Gripping

Product Descriptions

This EOAT is for 2 Cavities Parts Picking;
The Parts Would be Picked with Vacuum Cup;
The Sprue Gripper is Included for Sprue Gate Gripping;
The EOAT has the Air Circuit Divided into Two Suction Route and one Gripping Route;
The Gross Weight of the EOAT Seet is about 2kg.

Bom List

Product Name	PN #	Model	Quantity
Quick Changer	7.Y00175	QCS-G100	1
Sprue Gripper	8.Y00050	GR12-12CP	1
Plugs for Profile	4.Y00069	PEP2518	10
Cross Mounting Bracket for Profiles	7.Y00194	SMBA-2525T	6
Extruded Profile	4.Y00455	PEP2518-1000	2
Vacuum Cups VS2 Series	1.Y03085	VS2-SA11	6
Vacuum Cup Fitting	7.Y00703	VM-02-G18	6
Rotative Suspensions	8.Y00061	VFR1421-G18	6
Mounting Bracket	7.Y00200	SMBE1-1440T	6
Connector	1.Y02510	APF-M5	2
Side Manifold Block	7.Y00157	SMB-06M5	2
L-Type Threaded HOse Fitting	1.Y02722	APL6-01	8
Straight Threaded Hose Fitting	1.Y02725	APC6-01	6

Q & A About Robotic Arms and Injection Automation

What is a Picking Robot?

A picking robot in an injection project is a robotic arm which will pick the parts from the mould and have it placed on the conveyor or other automation system to have another processing. The projector will choose a picking robot according to the size of the injection molding machine, the injection cycle time, the weight of the parts etc to choose a picking robot.

High Speed Picking Robot SW7112DS

Take the SWITEK hgih speed 3 axis servo robot SW7112DS as an example, with a pay load of 2kg and a dry cycle time of 3.3s only designed for injection molding machine ranging from 150Ton ~ 500Tone, it could be regarded as one of the best picking robot for the thin-wall containers production business with a picking capacity up to 8 cavities of 700ml cups, but if for the picking of a bumper it would not be suitable. Anyway, to choose a picking robot for your injection project, the key point would be:

The size of your injection molding machine
The weight of the parts and EOAT
The total injection cycle
The height from the floor to the crane

SWITEK IML Robot Operating Instruction -- 3.6.4 Timer

High Performance Side Entry IML Robot