sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
BMB s.p.a., the world renowned brand of injection molding machine manufacturer, on showed their hybrid injection molding machine SP28I1300 at PlastImagen 2025 with turn-key solution of 8 cavities cups high speed production which the cups picked by a CAMPETELLA high speed robot, the world renowned robotic arms manufacturer from Italy.
The 8 cavities cups production system on show is running at a total cycle time around 6s with in mold time of around 1.2s, which is a super speed in the production of the 750ml cups of 8 cavities. The hybrid injection molding system is an economic solution between the hydraulic and all electric injection molding machine for a balance of the budget and energy saving.
The combination of the BMB injection molding machine and the CAMPETELLA high spped robot will ensure a super productivity of the cups, but for the production of cups they'll have to face the severe competition from their Chinese competitor of which the budget for the same productivity would be only about 50% or less of the BMB + CAMPETELLA solutions.
SW7312DS
Unit: mm
| X1 | X2 | X3 | X4 | Y | YM1 | YM2 | Z | L | W | H | Payload | 1020 | 730 | 0 | 0 | 1200 | 450 | 750 | 1700 | 2600 | 1660 | 2110 | 5kg |
|---|
EOAT Assembly Demonstration -- One Cavity Instrument Panel Picking EOAT
Product Descriptions
For vision control system for IML containers, what's the advantages and disadvantages of the open type of vision control system?
Vision control is now a very important in IML system especially the IML solutions for dairy products packages like yogurt cups, butter cups etc. For most European IML solutions providers like BRINK that they'll choose an open type of Vision control system which will check if the containers are well labeled or not immediately after the containers picked out from the mold and have them re-stacked after the vision control. This kind of solution will help to increase the efficiency of the IML System and pick out the defect parts quickly.
But, for some minor defect like dirt it would be impossible to be checked out because the precision of the cameras would be influenced by the changing light of the environment. To solve this problem the updated solution would be to have the IML containers checked in a closed light box which will creat a stable environment to the camera to minimize the misjudgement of the good and non good parts. -- SWITEK Yogurt Cups Vision Control Solution
