Abstract

The operator of the side entry Petri Dish Auto-packing System can check the alarming history of the system or check the meaning of the alarm code when there's an alarm in the "Alarming Page", which is a guide of fast trouble shooting in the petri dish auto-packing system maintenance or repairing.

Alarming Page

No.	Description
1	Alarming Page (Alarm Pg) 502
2	Alarm Reset (Reset) 579
3	Auto Mode (Auto)
4	Manual Mode (Manual)
5	System Parameters (Sys Params)
6	Position Setting (Pos Set)
7	Position Interface (Pos Interface)
8	Alarm Interface
9	I/O Monitor (I/O Mon)

Best Buy Robotic Arm for Injection Molding Machine

SW6710S

Unit: mm

X1	X2	X3	X4	Y	YM1	YM2	Z	L	W	H	Payload
900	750	0	0	1000	420	580	1750	2780	1610	1930	8kg

The Application of End of Robotic Arm Tooling

EOAT Assembly Demonstration -- One Cavity In Mold Insertion EOAT With Mold Positioner

One Cavity In Mold Insertion EOAT With Mold Positioner

Product Descriptions

This EOAT is for One Cavity Parts Picking and In Mold Insertion;
The EOAT has Two Sides, One Side for Parts Picking, the Oter Side for In Mold Insertion;
The Parts Would be Picked by the Vacuum Cups and One Finger Angular Pneumatic Gripper;
The EOAT to be Drived by Three Air Circuits, One for the Cylinder, the Other for Finger Angular Pneumatic Gripper and the Third One for Mould Positioner;
The Gross Weight of the EOAT Seet is about 9kg.

Bom List

Product Name	PN #	Model	Quantity
Extruded Profiles	4.Y00481	PEP2525-1500	1
Plugs for Profile	4.Y00070	PEP2525	8
Mould Positioner	8.Y00088	GMP20A	3
Vacuum Cups VS2 Series	1.Y05310	VS2-SA20	2
Rotative Suspensions	8.Y00061	VFR1421-G18	2
Pneumatic Finger Gripper	8.Y00084	GFR14-95G	7
Extension Tube	7.Y00733	SMBY14-50	6
Mounting Bracket	7.Y00200-T	SMBE1-1440T	3
Cross Mounting Bracket for Profiles	7.Y00194-T	SMBA-2525T	4
Vacuum Cup Fittings	7.Y00703	VM02-G18	2

Q & A About Robotic Arms and Injection Automation

For vision control system for IML containers, what's the advantages and disadvantages of the open type of vision control system?

Vision control is now a very important in IML system especially the IML solutions for dairy products packages like yogurt cups, butter cups etc. For most European IML solutions providers like BRINK that they'll choose an open type of Vision control system which will check if the containers are well labeled or not immediately after the containers picked out from the mold and have them re-stacked after the vision control. This kind of solution will help to increase the efficiency of the IML System and pick out the defect parts quickly.

But, for some minor defect like dirt it would be impossible to be checked out because the precision of the cameras would be influenced by the changing light of the environment. To solve this problem the updated solution would be to have the IML containers checked in a closed light box which will creat a stable environment to the camera to minimize the misjudgement of the good and non good parts. -- SWITEK Yogurt Cups Vision Control Solution

SWITEK Side Entry Petri Dish Auto-packing System Startup and Trouble Shooting -- Alarming Page

TURNKEY PETRI DISP AUTO-PACKING SOLUTIONS