5 Axis Servo Double Telescopic Arms Robot for Injection Molding Machine 80-850T

switek email

sales06@switek.biz

+86 186 5927 5869

Abonnieren Sie uns

.

robotic arms for Haitian injection molding machine

SWITEK SW6 Series 5 Axis Servo Robotic Arm for Injection Molding Machine 80~850T

About SWITEK SW6/D SERIES DOUBLE TELESCOPIC ARMS 5 AXIS SERVO ROBOT

The SWITEK SW6/D series of double telescopic arms 5 axis servo robot are designed for injection molding machine with clamping force 800~8500kN with a payload 3kg ~ 15kg. The standard configuration of this robot is a main arm for parts picking and a sub-arm for sprue picking in a 3 plates injection molding project. It can also be configured as a double main arms 5 axis servo robot for parts picking in a stack mold injection molding project. Compared to the standard robotic arms, the robot with a telescopic arm will help to reduce the height of the robot for an injection molding project in a low-lying workshop such as a clean room. The injection automation application of a double arms 5 axis servo robotic arm include:

3 Plates mold injection molding project parts & sprue picking application.
Stacking mold injection molding project parts picking application.
Double arms robotic arm top entry IML solutions for lids.
Double arms robotic arm in mold insertion injection automation solutions.
Double arms robotic two tones injection molding application solutions.

SWITEK 5 Axis Servo Robotic Arm Stack Mold Container Picking

SW6/D SERIES DOUBLE TELESCOPIC ARM ROBOT DIMENSIONAL PARAMETERS

robotic arms for Haitian injection molding machine

No.	Name	SW6308D	SW6310D	SW6710D	SW6712D	SW6715D
1	X1	740mm	740mm	1025mm	1025mm	1900mm
2	X2	640mm	640mm	605mm	605mm	734mm
3	X3	140mm	140mm	250mm	250mm	450mm
4	X4	415mm	415mm	590mm	590mm	1150mm
5	Y	800mm	1000mm	1000mm	1200mm	1500mm
6	Z	1350mm	1650mm	1750mm	2000mm	2300mm
7	YM1	235mm	235mm	475mm	475mm	450mm
8	YM2	565mm	765mm	525mm	725mm	1050mm
9	W	1500mm	1500mm	1610mm	1610mm	2350mm
10	L	2320mm	2640mm	2780mm	3020mm	3120mm
11	H	1460mm	1580mm	1930mm	2050mm	2400mm
12	Hs	380mm	380mm	620mm	620mm	700mm
13	Payload/kgs	3kg	3kg	6kg	6kg	15kg

Q & A ABOUT SWITEK SW6/D SERIES OF DOUBLE TELESCOPIC ARMS ROBOT SELECTION

Will the SW6/D Series Double Telescopic Robotic Arm to be Equipped with EU67 Interface?
For the interface of the SWITEK SW6/D series of double telescopic arms injection robot will custom make the EU12/EU67/JIS interface according to the interface of the injection molding machine.
What to be Taken Into Consideration when You Ordering a Double Arms 5 Axis Servo Robot?
The SWITEK SW6/D series of double telescopic arms robots are designed for the 3 plates or stack mold injection molding project. But for the 3 plates mold injection molding project the robot should be a main arm + sub-arm configuration while for stack mold project it would be double main arms configuration. And if there's any special requirement it must be clarified before the order confirmation.
What's Would be the Key Parameters for the Selection of a Robotic Arm for an Injection Automation Project?
The key paramerters of robotic arm selecting for an injection automation project includes:
- The distance from the mold center to the mounting point of the robotic arm to ensure that the robot can pick the parts from the mold.
- The height of the safe door to ensure that the EOAT of the robotic arm can get out of the injection molding machine.
- The distance from the mold center to the conveyor to ensure that the parts can be dropped to the correct place.
- The weight of the parts and EOAT to ensure that the robotic arm has sufficient loading capacity and ensure a safe picking.
To simplify the parameters preparation please contact the sales of SWITEK for detailed datasheet collecting form for the robotic arm.

Email: sales06@switek.biz

WhatsApp

WeChat

Contact SWITEK Robot

Home

Plastic Machinery News

HuangYanZheng©Copy Right

privacy

Privacy