SW2 SERIES SPRUE PICKING ROBOT
About SWITEK SW2 Series Sprue Picking Robotic Arms
The SW2 Series Sprue Picking Robot is a sprue picker designed and produced by GuangDong SWITEK Technology CO.,Ltd. for the sprue picking from
injection molding machines with calmping force 50~200T which include but not limited to:
- Haitian Mars Series of high precision servo injection molding machien
- YIZUMI A5/A6 EU Series High End Servo Injection Molding Machine
- ChenHsong MK6 Series Servo Injection Molding Machine
- Haida HDX/HDL Series High Precision Servo Energy Saving Injection Molding Machine
- LK Potenza Series Servo Energy Saving Injection Molding Machine
- WELLTEC SE Series Servo Energey Saving Injection Molding Machine
- Tederic NEO T Series Servo Hydraulic Injection Molding Machine
- Other High Precision Servo Injection Molding Machine
SW2 SERIES ROBOTIC ARMS DIMENSIONAL PARAMETERS
Unit: mm
| No. |
Name |
SW255C |
SW257C |
| 1 |
X1 |
300 |
300 |
| 2 |
X2 |
100 |
100 |
| 3 |
Y |
545 |
695 |
| 4 |
YM1 |
165 |
215 |
| 5 |
YM2 |
380 |
480 |
| 6 |
W |
670 |
670 |
| 7 |
H |
1300 |
1450 |
| 8 |
Hs |
390 |
440 |
| 9 |
Payload/kgs |
2 |
2 |
| 10 |
IMM |
50~150T |
50~200T |
| 11 |
Dry Cycle Time |
3.8s |
3.8s |
Features of SWITEK SW2 Series Sprue Picking Robot
Although the SW2 series is a cylinder driven robotic arm with single function of sprue picking only for a small injection molding machine up to 200T
originated about 40 years ago, but it's the best choice in the production of small size precision plastic parts with runner with below advantages:
-
Easy Installation & Maintenance: As a cylinder driven robotic arm, the installation and maintenance of the SW2 series sprue picking robot
is easy to be installed and maintenance with minimized size. It's the best robotic arm for injection molding machine from 50~200T in production
of small size precision parts with sprue runner.
-
Easy Programming & Parameters Setting: With up to 100 groups of pre-set programs, the SW2 series of sprue picking robot can be programmed
with simple program selection and parameters setting. Which makes the injection molding project with the SW2 series sprue picking robot easy to
start up one.
-
Uncompetable Price: Compare to the servo robot, the SW2 sprue picking robot has a much lower price for the same injection molding machine,
and for a small injection molding machine the light weight sprue picking robot is safer and help to reduce the maintenance cost of both the
injection molding machine and the sprue picker itself. It's a price smart solution for an injection molding project with simple sprue picking.
