sales06@switek.biz
+86 186 5927 5869
Abonnieren Sie uns
sales06@switek.biz
+86 186 5927 5869
Abonnieren Sie uns
CONAIR On Show New Centralized Feeding System with AI Technology at NPE 2024
Tags: NPE 2024, CONAIR Centeralized Feeding System,Injection Automation, IML Containers, Clean Room for food container production
NPE 2024, Conair on show plastic material AI controlled centralized feeding solution for the mass production of plastic parts.
A centralized feeding system in the plastic industry will help to reduce waist of the material and ensure the precisized blending of different materials for like the pigment and the material to ensure the quality of the parts produced, reduce the powder generated during the injection process to better protection of our environment.
For producers of IML containers for food especially the IML containers for dairy products like Yogurt, the centrallized feeding system is even more important because the food safety is critical to not only the food itself but also the food container. A centralized system will ensure that the environment of the clean room would be well maintained to ensure that the IML containers produced is free from the polution of plastic powder.
The new CONAIR centeralized feeding system on show NPE 2024 will provid their clients with a smarter, material saving and energy saving system with their cutting edge AI technology.
Best Buy Robotic Arm for Injection Molding Machine
SW818
Unit: mm
| X1 | X2 | X3 | X4 | Y | YM1 | YM2 | Z | L | W | H | Payload | 190 | 190 | 0 | 0 | 400 | 0 | 0 | 2100 | 2730 | 2410 | 1720 | 5kg |
|---|
Q & A About Robotic Arms and Injection Automation
For Thin Wall Container IML Production, Will YIZUME P250E or P250K3 a Better Choice for Your Project?
As for which injection molding machine is a better choice for your IML project, it'll depends on your budget and requirement about the parts. As we know both P250E and P280K3 are excellent high speed injection molding machine designed for the injection production of thin wall containers with high injection speed for the fast injection of thin wall containers. They're no dobt excellent injection molding machine for your IML project. But, how to make a decision between?
Both P250E and P250K3 has similar injection speed (300/500 mm/s optional for P250E and 320mm/s for P250K3) but P250E is an all electric injection molding machine while P250K3 is a high speed hydraulic injection molding machine. Of course an all electric injection molding machine is a better choice for food container IML production, but, the cost of it would be much higher than P250K3. So, if your budget is sufficient, P250E, if not, P250K3 would be the right one for you.
The IML robot for YIZUMI P250K3/P250E would be SWITEK IML Robot SW833. In K2019 SWITEK IML robot SW833 work with P250E in demo of 4 cavities cups at the cycle time of 2.1s, this combination is one of the best IML solution for small size containers IML production.
