SWITEK Engineer Finished the Installation of New Magazines in Chile

Tags: SWITEK IML, IML Robot, IML Solutions, Side Entry IML Robot, Chinese IML Robot Manufacturer

2 Cavities Sweat Box 5 Faces Labeling Side Entry IML Solution

SWITEK engineer finished the installation of a 4 cavities magazine of box 5 faces labeling installed to an old IML robot and started up in Chile.

The new installation service of our engineer in Chile is for the upgrading of the IML system which our clients have for a new market with the minimum investment by only replace the magazine and EOAT to switch the IML system from the production of one container to the other. With onsite installation and maintenance service from SWITEK, our clients will get a renewed IML system of efficient and stable.

As one of leading IML solutions provider growing up from the fast changing Chinese market, SWITEK engineers will always have "upgradable" ideal as the guideline of an IML system because our clients are challenging in a fast changing market, which means that they're allowed to upgrade their system immediately to provide their customer a new package. Designed under this mechanism, the SW8 series of IML robot if one of the best choice for small and medium sized producers of IML containers.

SW6710S

Unit: mm

X1	X2	X3	X4	Y	YM1	YM2	Z	L	W	H	Payload
900	750	0	0	1000	420	580	1750	2780	1610	1930	8kg

Q & A About Robotic Arms and Injection Automation

YIZUMI P350 or P380K3, which one would be a better choice for your IML project?

P350 is a high speed injection molding machine designed for thin-wall containers while P380K3 is the third generation of high speed injection molding machine by YIZUMI designed for thin-wall containers. With 30 Tons more in clamping force, does it mean that P380K3 will compatible to the molds designed according to the parameters of P350?

In one just finished IML project we encountered something embrassing. There's one mold designed according to the parameter of YIZUMI P350, and we have a P380K3 in our system testing workshop, but when the mold received we find that the mold thinkness exceeded the max mold thickness of the P380K3. After double check the parameters of both the injection molding machine we found that Mold thickness allowed for P350 is 300~750mm while the mold thickness for P380K3 is only 250~650mm. And the Max Daylight of P380K3 is 160mm less than P350.

Then how to choose between, which one would be a better choice for your IML project? It would be depends on the size of the parts of which you're producing. For smaller container 30 Tons more clamping force with 160mm less max daylight means that the injection molding machine will have a less mold Open/Close time and result in a higher productivity while for larger size containers P350 will allow you to install a thicker mold, it would be more friendly to an IML project of deep cavity containers.

For more insights of the cutting edge IML technology please feel free to contact Adams from SWITEK, your personal consultant of IML Solutions.

Contact SWITEK Robot On WhatsApp.