P350E/650C
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 403 |
| Shot weight | g | 370 |
| Shot speed | mm/s | 300 |
| Screw diameter | mm | 50 |
| Injection pressure | MPa | 162 |
| Screw L:D ratio | -- | 22:1 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3500 |
| Opening Stroke | mm | 700 |
| Space between tie bars | mm x mm | 730 x 730 |
| Mold thickness(min) | mm | 300 |
| Mold thickness(max) | mm | 750 |
| Hydraulic ejection stroke | mm | 200 |
| Hydraulic ejection force | kN | 99 |
| POWER UNIT | ||
| Pump motor | kW | 25 |
| Heating capacity | kW | 21 |
| GENERAL | ||
| Oil tank capacity | L | 130 |
Platen Dimension
Machine Dimmension
Today I find an interested video in youtube published by FCS Machinery to demonstrate the two tone injection production of 680ml airtight container by their new All-Electric two-component injection molding machine CT-230R which was designed for the production of two-component and multi-component products, including electronic parts, medical appliance, cosmetic containers, etc.
Although it's a 230Ton machine, but as a two-component injection molding machine its size will usually much larger than the standard servo injection molding machine, the robot to recommend here is SW6710DS-20 which is a 3 axis servo injection robot with a payload up to 6kg. Stable and efficient as it's, for sure will help you greatly in your production.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
