JU5500III-3430C
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 2100 |
| Shot weight | g | 1911 |
| Shot speed | mm/s | 567 |
| Screw diameter | mm | 85 |
| Injection pressure | MPa | 141 |
| Screw L:D ratio | -- | 18.9 |
| CLAMPING UNIT | ||
| Clamping force | kN | 5500 |
| Opening Stroke | mm | 1300 |
| Space between tie bars | mm x mm | 920 x 830 |
| Mold thickness(min) | mm | 350 |
| Mold thickness(max) | mm | 900 |
| Hydraulic ejection stroke | mm | 250 |
| Hydraulic ejection force | kN | 110 |
| POWER UNIT | ||
| Pump motor | kW | 55 |
| Heating capacity | kW | 39 |
| GENERAL | ||
| Oil tank capacity | L | 520 |
Clamping Unit
Platen Dimensions
Robot
Front View
Top View
Side View
| # | Value |
|---|---|
| A | 2110 mm |
| B | 2016 mm |
| C | 2366 mm |
| D | 2250 mm |
| E | 1175 mm |
| F | 1175 |
| G | 1082 mm |
| H | 903 mm |
| I | 675 mm |
| J | 3581 mm |
| K | 3612 mm |
| M | 3056 mm |
| N | 1400 |
JetEngine new IML robot for 2 compartment container IML production of 2 cavities mould started up successfuly in production.
The two compartments cup is one of the most popular container for Yogurt among the European dairy producers which is a samart solution to serve some other ingredients together with the Yogort of the original taste like a combo of nuts. The combination of Yogurt + nuts will provide the consumer a low fat suppliment of engergy immediatly. It's warmly welcomed by the office ladies.
Althoug it's a smart container for Yogurt, but it's not so smart to produce. With 3 labels to one cup from different side, it's a challenge to any IML solution providers. With modular design, the SW8 Series of IML robot by SWITEK is an ideal choice for the production of 2 compartmnets IML Cups.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
