U218TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	460
Shot weight	g	419
Shot speed	mm/s	180
Screw diameter	mm	45
Injection pressure	MPa	228
Screw L:D ratio	--	24.4
CLAMPING UNIT
Clamping force	kN	2180
Opening Stroke	mm	500
Space between tie bars	mm x mm	510 x 510
Mold thickness(min)	mm	200
Mold thickness(max)	mm	530
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	70
POWER UNIT
Pump motor	kW	19
Heating capacity	kW	16.3
GENERAL
Oil tank capacity	L	230

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	6000 mm
B	3270 mm
C	650 mm
D	405 mm
E	60 mm
F	1900 mm
G	1330 mm
H	1340 mm
I	764 mm
J	2200 mm
K	4690 mm
L	1840 mm
M	1010 mm
N	1050 mm
O	1470 mm

As the center of the IML system, to choose an injection molding machine of which is the most suitable to your IML containers and mould design would be the key points to start a success IML project. Before the decision making of an injection molding machine for your project, you should keep in mind:

The material of which the IML containers to be produced from
The opening stroke of the injection molding machine
The expected cycle time of the system

For different parts, you can choose different type of injection molding machine according to your budget and expected daily output of the IML containers.

High Speed Injection Molding Machine for Think-wall Containers

High Speed Hydraulic Injection Molding Machine:
For thin wall containers, a high speed hydraulic injection molding machine is no doublt a price smart choice for your IML project. There're many producers of high speed hydraulic injection molding machine manufacturers in China, among which the most popular would be:
- Haitian MARS F/H series high speed injection molding machine
- YIZUMI P/S3 series high speed injection molding machine
- HMD SP series high speed injection molding machine
- ChenHsong Speed-Pack series high speed injection molding machine
- Golden Eagle GEKW/GS series high speed injection molding machine
- Powerjet KF series of high speed injection molding machine
- DAKUMA DKM/HH series high speed injection molding machine
Hybrid Injection Molding Machine
A high speed hybrid injection molding machine will have more energy efficiency than a hydraulic injection molding machine, the popular hybrid injection molding machine made in China include:
- Yizumi D1-E series of hybrid injection molding machine
- Haida KDY series of high speed hybrid injection molding machine
- FCS AF series hybrid injection molding machine
- PowerJet JEV Series hybrid injection molding machine
All Electric Injection Molding Machine
As a solution of energy saving and clean production, an all electric injeciton molding machine would be the top choice for the IML production of thin-wall food package, the recommended brand would be:
- Zhafir ZE/VE series of all electric injection molding machine
- Yizumi E series of high speed all electric injection molding machine
- VALMO Real P series full electric injection molding machine
- HMD EM Series full electric injection molding machine
- LK ELETTRICA Series of full electric injection molding machine
- BOLE FE Series all electric injection molding machine
- WELLTEC D Series all electric injection molding machine

Injection Molding Machine for IML Paint Buckets

As a deep cavity products, the production of an IML paint buckets will request the injection molding machine to have a larger opening stroke. To reduce the cost of the injection molding machine, some of the injection molding machine manufacturers from China custom designed the machine specialized for the production of IML paint bucket, among which include:

HD B/U series of injection molding machine for IML paint bucket production
PowerJet PB series of injection molding machine for IML paint bucket production
LiSong GT/DT Series of injection molding machine for IML Paint bucket production

Best Buy Robotic Arm for Injection Molding Machine

SW6710D-20

Unit: mm

X1	X2	X3	X4	Y	YM1	YM2	Z	L	W	H	Payload
1025	1025	250	590	1000	475	525	1750	2780	1610	1930	8kg

The Application of End of Robotic Arm Tooling

EOAT Assembly Demonstration -- One Cavity In Mold Insertion EOAT With Mold Positioner

One Cavity In Mold Insertion EOAT With Mold Positioner

Product Descriptions

This EOAT is for One Cavity Parts Picking and In Mold Insertion;
The EOAT has Two Sides, One Side for Parts Picking, the Oter Side for In Mold Insertion;
The Parts Would be Picked by the Vacuum Cups and One Finger Angular Pneumatic Gripper;
The EOAT to be Drived by Three Air Circuits, One for the Cylinder, the Other for Finger Angular Pneumatic Gripper and the Third One for Mould Positioner;
The Gross Weight of the EOAT Seet is about 9kg.

Bom List

Product Name	PN #	Model	Quantity
Extruded Profiles	4.Y00481	PEP2525-1500	1
Plugs for Profile	4.Y00070	PEP2525	8
Mould Positioner	8.Y00088	GMP20A	3
Vacuum Cups VS2 Series	1.Y05310	VS2-SA20	2
Rotative Suspensions	8.Y00061	VFR1421-G18	2
Pneumatic Finger Gripper	8.Y00084	GFR14-95G	7
Extension Tube	7.Y00733	SMBY14-50	6
Mounting Bracket	7.Y00200-T	SMBE1-1440T	3
Cross Mounting Bracket for Profiles	7.Y00194-T	SMBA-2525T	4
Vacuum Cup Fittings	7.Y00703	VM02-G18	2

Q & A About Robotic Arms and Injection Automation

For a Bucket Injection Production System with Haitian Jupiter Series Two Platens Injection Molding Machine, which Robot is the Best for It?

JU4500 is a medium sized two platen hydraulic injection molding machine by Haitian group with a clampling force of 4500kN. As a two platen injection molding machine it has a much shorter body length and is an ideal choice for the production of deep cavity products such as buckets etc., below is the general parameters of it:

Clamping Force: 4500kN
Dist. Between Tie Bars (H x V): 810 x 800
Mold Hiehgt Max: 850mm
Mold Height Min: 350mm
Mold Opening Stroke: 1050/550mm
Max. Mold Weight (T): 6.5

Best Picking Robot for JU4500

For a bucket production project with JU4500 we have two recommendation, one is for the production of the plain bucket which the robot will do the picking and stacking only, the robot to recommend is SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload of 6kg and is an ideal choice for the picking and stacking of the buckets; the other is a bcket production project with IML, which the robot will not only pick and stacking the bucket but also have the label put into the mold, the robot to recommend is SWITEK SW7312DS, with kick-back design, it'll will provide more space for the EOAT.

For more information about robot selection for Haitian injection molding machine please contact Adams from SWITEK to get a professional advisory of robot selection for your injection automation solutions.

U218TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China

Machine Specification

Machine Dimension

IML Projects Injection Molding Machine Selection

Best Buy Robotic Arm for Injection Molding Machine

The Application of End of Robotic Arm Tooling

One Cavity In Mold Insertion EOAT With Mold Positioner

Q & A About Robotic Arms and Injection Automation

Contact SWITEK Robot On WhatsApp.